Thanks for purchasing our mini laser star projector,there are at least seven types of patterns displayed in your room, such as flower ,animal,special words,finger,Five-pointed star and so on .what’s more ,the projector with voice control,the red and green laser will light and disappear according to any voice or without voice.Amazing effect and fantastic atmosphere can be made by just one piece of this projector.

Packing List:

1.one piece mini laser star;  2.one piece AC adaptor;
3.one piece manual ;        4.one piece spanner

Specification:

1.Voltage:input 110-240V,output:5V
2.Electric Current:0.8-1.2A
3.Green laser wavelength:532nm(+5nm)
  Red laser wavelength:650nm(+10nm)
4.Output power:5-50mw
5.Laser Rank:CLASS III B
6.Dimension:85x138(mm)  3.3x5.4(inch)   
7. N.W:276g                                  

Operation:   
                                          
1..Insert the adaptor into the DC Socket;    
2.Press ON/OFF button,the projector start working ;
3.Two gears for the speed control switch,press once it turns slow,press again it turns fast;
4.To be sound mode ,just twist the voice control button to right side until the laser light off,make some voice the laser will light .
5.Twist the voice control button to left end it will work automatically.
6.Working hours recommended:less than 5 hours continual use.

Notice and Warning:

1.Please don’t shot eyes directly;
2.Please don’t allow children to operate this projector;
3.If the projector doesn’t work when you turn on it ,please twist the voice control button to left end .
4.When the temperature indoor below 20°C，it takes about 10 mins to work normally for the green laser.
5.When set in low speed condition ,maybe the motor will stagnate about 2-3 seconds after turn on the light, this situation is normal.