Mini Laser Starry Manual

Thank you for your purchasing our Mini laser star projector. It can make thousands of star in your room with amazing effect. The stars are constantly moving and morphing,just like you are in the Universe.

□Green laser             □Green laser & Red laser  □Red laser □Purple laser
□Green laser & Blue LED  □Red laser & Blue LED     □Others

Specification:

1)□-Red Laser wavelenght:650±10nm   □-Green laser wavelength: 532±5nm □Others: 400nm-700nm
2)Input//Output-Voltage:110-240V//5V     DC:0.8-1.2A
3)Output power:<5mw-50mw
4)Unit Dimension:98mm*80mm*40mm
5)Inside Components：Built in 2 precision glass lens and motor of slow speed.
6)Working hours recommended: less than 5 hours continual use.

Operation:

1.Press ON/OFF button (see Figure 1) to light up it.
2.Rotary switch use for adjusting the laser speed.
3.Full adjustable to meet any angle to use.
4.Warning:Avoid direct eyes exposure.
5.Attached extra screwdriver use for tighting of bracket.

The operation Process of Red & green laser starry:

□Type one -> Turn on/red&green light 3 minutes -> single light (red or green) each light works for 3 minutes -> recycle (Only for red&green Laser starry manual)
□Type two -> Turn on/red&green light 15 seconds -> red or green light alternate 15 seconds -> single light (red or green) each light works for 15 seconds -> red or green light twinkle 3 seconds -> single light (red or green) twinkle 3 seconds ->recycle (Only for red&green Laser starry manual)

Notice:

1.When the product use in the moist environment, the light may not clear,you can clearing the glass lens by the cotton tip with alcohol.
2.This equipment should be kept away from children, Avoiding direct eyes exposure.
3.When the speed of rotation is adjusted slowest,the motor maybe stop.If this situation happen, please re-adjust the black button.